Select from New Products

Choke Coils

For PFC / For Smoothing

Powder Core

・Fe-Ni Powder Core・Fe-Ni Powder Core (NEW)・Fe-Si Powder Core (NEW)・Fe-Si-Al Powder Core (NEW)

  • TMHD ： TMHD series has superior DC bias characteristics and better core loss.
  • TMFD ： Less expensive, with superior DC bias characteristics and equivalent core losses
  • TMSD ： This series has superior DC bias characteristics and lower DC resistance than our previous model.

For Noise Filter

Nano-Crystalline Core

- Single-Phase/Three-Phase Nano-Crystalline Core (NEW) - Nano-Crystalline Core (NEW)

  • High permeability
  • Effective noise reduction over a wide bandwidth
  • Miniaturizable

Current Sensors

Measurement Current/100A-999A

250～500A (L57S Series)

Suitable for measuring high-frequency currents (～30kHz)

  • Operating temperature: -40 ～ +105 ℃
  • Ferrite core is used. Heat generation due to high-frequency current is reduced.
  • Wide measuring current range
    ・Saturation current range from 750A to 1150A (Ta = +25℃)
    ・Saturation current range from 650A to 900A (Ta = +105℃)

  • Panel mounting with 3 different connectors available on secondary
    ・L57SxxxD15J ：JST / B4B-XH-A-G, Gold-plated terminal connector
    ・L57SxxxD15M：MOLEX / 206832-0401, Tin-plated terminal connector　(Gold-plated terminal connecter of product can be build to order)
    ・L57SxxxD15A：TE Connectivity / 1744439-4, Tin-plated terminal connector
  • Aperture size：□25.8×41.0 mm
300～1500A (L52S Series)

Suitable for high power of general purpose inverter

  • Operating temperature : -40 ～ +105 ℃
  • Wide measuring current range with Saturation current range from 900A to 4500A
  • Panel mounting with Locking connector available on secondary
    JST/ B04B-XASK-1-A-GW, Gold-plated terminal connector
  • Aperture size：□ 40.0 × 20.0 mm
  • Use Anti-Sulfurated Resistors

Measurement Current 1000A or more

250～500A (L57S Series)

Suitable for measuring high-frequency currents (～30kHz)

  • Operating temperature: -40 ～ +105 ℃
  • Ferrite core is used. Heat generation due to high-frequency current is reduced.
  • Wide measuring current range
    ・Saturation current range from 750A to 1150A (Ta = +25℃)
    ・Saturation current range from 650A to 900A (Ta = +105℃)

  • Panel mounting with 3 different connectors available on secondary
    ・L57SxxxD15J ：JST / B4B-XH-A-G, Gold-plated terminal connector
    ・L57SxxxD15M：MOLEX / 206832-0401, Tin-plated terminal connector　(Gold-plated terminal connecter of product can be build to order)
    ・L57SxxxD15A：TE Connectivity / 1744439-4, Tin-plated terminal connector
  • Aperture size：□25.8×41.0 mm
300～1500A (L52S Series)

Suitable for high power of general purpose inverter

  • Operating temperature : -40 ～ +105 ℃
  • Wide measuring current range with Saturation current range from 900A to 4500A
  • Panel mounting with Locking connector available on secondary
    JST/ B04B-XASK-1-A-GW, Gold-plated terminal connector
  • Aperture size：□ 40.0 × 20.0 mm
  • Use Anti-Sulfurated Resistors

Open loop type

250～500A (L57S Series)

Suitable for measuring high-frequency currents (～30kHz)

  • Operating temperature: -40 ～ +105 ℃
  • Ferrite core is used. Heat generation due to high-frequency current is reduced.
  • Wide measuring current range
    ・Saturation current range from 750A to 1150A (Ta = +25℃)
    ・Saturation current range from 650A to 900A (Ta = +105℃)

  • Panel mounting with 3 different connectors available on secondary
    ・L57SxxxD15J ：JST / B4B-XH-A-G, Gold-plated terminal connector
    ・L57SxxxD15M：MOLEX / 206832-0401, Tin-plated terminal connector　(Gold-plated terminal connecter of product can be build to order)
    ・L57SxxxD15A：TE Connectivity / 1744439-4, Tin-plated terminal connector
  • Aperture size：□25.8×41.0 mm
300～1500A (L52S Series)

Suitable for high power of general purpose inverter

  • Operating temperature : -40 ～ +105 ℃
  • Wide measuring current range with Saturation current range from 900A to 4500A
  • Panel mounting with Locking connector available on secondary
    JST/ B04B-XASK-1-A-GW, Gold-plated terminal connector
  • Aperture size：□ 40.0 × 20.0 mm
  • Use Anti-Sulfurated Resistors

Solder Paste for Semiconductors

For Micro-Bump Formation

DF Process Solder Paste

Solder paste for semiconductor bump formation using fine powder with reduced alpha radiation, suitable for dry film printing processes.

  • Supports bump formation for ~60µm pitch bumps using dry film resist.
  • Complies with IPC's halogen-free standards (Br,Cl content in paste ≥900ppm, total ≥1500ppm).
  • Low alpha-compatible.
  • Supports C4 bumps and C2 bumps.
  • Reduces bump height variation.

For CC Mounting (Antimony-Based)

Sb (5%) Solder Paste

SnSb (5%) alloy paste.Can be used when setting temperature hierarchy.

  • Non-halogen flux.
  • Pb-free SnSb alloy solder.
  • Supports 0402 (mm size) chip component mounting.
  • Residues after reflow can be cleaned with semi-water-based cleaning solvents.

Contact & Download Materials

Suitable products are proposed to meet your specific needs. Feel free to contact us for more information.

  • *Only 3D CAD data for the following products are available for download: Current Sensors, Gate Drivers, and Isolated DC-DC converter modules.
Product & Maintenance
Download Materials
3D CAD Data Download

Search for Products

Select from Product Categories
Select from Applications
Select from New Products

Search by Keywords

  1. TOP
  2. Product Information
  3. Select from New Products