Air Wave Soldering SystemGAW Series
-
-
- Standard built in spray fluxer
- TAMURA’ s GLOBAL STANDARD Model
Features
- Spray fluxer is built into equipment with special low-pressure nozzle.
- Top and bottom exhaust filter minimize flux spread contamination.
- 1.5m long powerful far infrared pre-heater
- Titanium solder bath provide energy saving with double layered heat insulations.
STANDARD /OPTIONS
-
STANDARD FUNCTIONS
- Independent inlet insertion conveyor
- Fluxer automatically adjust spraying to follow the conveyor speed and width.
- Sirocco fan is used for fluxer forced ventilation.
- Flux liquid shortage detect function
- Solder bath overheat detector is built in.
- Variable conveyor angle by 4-5 degrees
-
OPTIONS
- Proportioning pump method, flux supply
- Electric bath lifter, motored pulling out
- Claw washer liquid shortage detection
- Intermittent solder jet
- Solder shortage detector
- Solder inner bath leak detection
- PCB warp prevention in solder bath block
- Exterior color can be specified
- Automatic supply of wire solder
- 3-color signal tower
- Outlet conveyor
- PCB cooling fan(with variable air flow and direction)
Specifications for equipment
SPECIFICATION
|
GAW33-36ST |
Applicable boards |
MAX W330×L350×t1.6 (mm)
MIN W 50×L120×0.6 (mm) |
Component height |
Upper MAX. 150mm or lower
Lower MAX. 6mm or lower |
Input Power source |
AC380V±10%-50Hz-3φ 32kVA 49A |
Conveyor angle |
4 ~ 5° |
Dimensions of machine |
W1320×L4200※1×H1570※2(mm) |
Weight
(Excluding solder) |
Approx. 1400kg |
Soldering capacity |
Approx. 490kg |
- ※Specifications are subject to change without prior notice. Please acknowledge it beforehand.
- ※1Except inlet and outlet sprockets
- ※2Except Exhaust Duct, Signal Tower and LCD Monitor
All kinds of other size variations are available
Select from Other Product