8/9/2019 NT110 Firmware V01.14.19 New function in V01.14.19 ・There are no new features. Notes on V01.14.19 ・When updating NT110 to this version, please update NT110 NT Mix to V2.20 or later. Improvements in V01.14.19 ・Font change of the some display letter. Fixed bugs in V01.14.19 ・When FADER 13 or 14 is assigned HA by DEFINE function, P48 ON/OFF information may not be displayed correctly. ・When LAYER changes while operating FADER of 15 CH or 16 CH, FADER level information is left. --------------------------------------------------------------------------------------- 7/4/2019 NT110 Firmware V01.14.14 New function in V01.14.14 ・There are no new features. Notes on V01.14.14 ・When updating NT110 to this version, please update NT110 NT Mix to V2.20 or later. Improvements in V01.14.14 ・There is no corresponding improvement point. Fixed bugs in V01.14.14 ・The audio output start after power on may be slower than normal. ・The level may be low when assigning from the INPUT channel to the SUM channel. ・When PINK noise is selected for OSC, OSC output level is low. ・If you change the FU number setting of multiple FADERs, FU THR by the REM button may not be reflected in the sound. ・Changes in GPI input during PRESET PROGRAM LOAD may not be reflected in internal control. --------------------------------------------------------------------------------------- 11/27/2018 NT110 Firmware V01.14.11 New function in V01.14.11 ・Supports NT NET IO Share function Notes on V01.14.11 ・When updating NT110 to this version, please update NT110 NT Mix to V2.20 or later. Improvements in V01.14.11 ・There is no corresponding improvement point. Fixed bugs in V01.14.11 ・There is no corresponding fix bug. --------------------------------------------------------------------------------------- 9/12/2018 NT110 Firmware V01.13.04 New function in V01.13.04 ・Supports MIC/LINE IN CARD, LINE OUT CARD Notes on V01.13.04 ・When updating NT110 to this version, please update NT110 NT Mix to V2.10 or later. Improvements in V01.13.04 ・There is no corresponding improvement point. Fixed bugs in V01.13.04 ・Dante CARD may not recognized and the card information may not be displayed. (Only for V01.12.08) ・When you select the OFF channel on the Overview screen and press the clear button, the Output Source setting of the Out Mtx screen is all turned off. (Only for V01.12.08) --------------------------------------------------------------------------------------- 8/7/2018 NT110 Firmware V01.12.08 New function in V01.12.08 ・Supports Rio Remote function ・Supports NT NET Remote Link function Notes on V01.12.08 ・When updating NT110 to this version, please update NT110 NT Mix to V2.04 or later. Improvements in V01.12.08 ・There is no corresponding improvement point. Fixed bugs in V01.12.08 ・When the AES3id input cable is removed from the state displaying the GR meter of the INPUT channel, the GR meter may remain displayed. ・When updating the display on the screen, the meter bar graph, the EQ/DYNAMICS/PAN graph, Channel names, icons, etc. may not be displayed. ・When transferring backup data from NT Mix to NT110, even if DSP resources remain In some cases, new FADER of INPUT channel can not be created. ・When Layer/Bank switching is performed while Channel Setting screen is displayed, LINK FUNC(FU/AVL/REM) display before Layer/Bank switching may remain. ・When creating FADER, the motor of the creation fader may be driven and move for a moment. ・When Layer/Bank switching is performed, the Select Encoder Guide display of CH13 and CH14 may be lost. ・If FADER is deleted, the SUM PAN/BAL parameters of other channels may be initialized. --------------------------------------------------------------------------------------- NT110 Firmware V01.11.28 New features in V01.11.28 ・There are no new features. Improvements in V01.11.28 ・Improve distortion waveform at output audio clip. Fixed bugs in V01.11.28 ・Even when there is no input of digital audio, the GR meter of the INPUT channel may be left swinging. ・DELAY of MASTER channel (M1-7, M1-8, M2-8) does not work. ・When set to CASCADE SLAVE, the SUM channel and the DELAY set for the MASTER channel are applied to the CASCADE audio output (SUM 1-16, M 2 - 8) and the audio is delayed. ・When the ALARM LOG screen window is displayed and the scroll operation is performed, the whole screen may turn white. ・Even if you release your hand from a non-lock button (such as a TB button) the button may stay ON. ・The frequency set to 5.1 surround Rs ch is output from Ls ch. ・In the setting of COMP RATIO Max, the level exceeding THRESHOLD is output and the sound may be distorted. ・LPF, LFE FILTER of SUM channel does not work. ・The EQ4 GAIN of the SUM channel always operates with positive equivalent. ・Encoder operation during LOCK is reflected when LOCK is canceled. ・When set to CASCADE SLAVE, when you touch the ch 64 DESTINATION area of CASCADE SLOT on the OUTPUT MTX screen, the whole mixer freezes. ・After displaying the STATUS screen from pressing the ALARM button on the METER screen, if SOURCE of DIRECT OUT is selected on the OUTPUT MTX screen, an alarm of SECONDARY DSP CARD occurs. ・GPO MIC ON may not be output when power is turned on with GPI FU ON ・When two GPIO CARDs are mounted, do not output GPO MIC ON ・When two MADI CARDs are mounted on one NT110 and the CASCADE function is used, the APFL of the CASCADE MASTER may not be turned ON even if the NT110 APFL button of CASCADE SLAVE is turned ON ・If you turn on multiple GPI FU inputs with different FU numbers at the same time, the FU may not turn on --------------------------------------------------------------------------------------- NT110 Firmware V01.11.15 New features in V01.11.15 ・There are no new features. Improvements in V01.11.15 ・There are no new improvements. Fixed bugs in V01.11.15 ・When you operation a DUPLICATE FADER, fixed bug that LINKed FADER is highlighted. ・When you changing a BUS FORMAT, Fixed a bug that InsertBusBank set to OUTMTX is not released. ・Fixed a bug that the setting display shifted on OSC Int or TB Int setting screen in GPIO Card - GPI on TOUCH PANEL. ・Fixed a bug where the reference level of the COMM IN input was different from the specification. COMM IN input reference level  before correction:-35dBu -> after correction:-15dBu ・In STEREO CH, when you operation a M/S on, fixed bug that CH to be controlled shifted. ・When overwriting M/L CH and allocating, Fixed a bug that HA GAIN and P48 are not initialize. ・When Preset Load or abnormality occurs, Fixed a bug that touch panel operation can't be performed for about 40 seconds. ・When 15ch and 16ch FADER are operated, fixed a bug that the fader level isn't display on the touch panel.