Top>Gate Driver>2DM Series
Gate Driver Module 2DM Series
The 2DM series is a product that integrates a gate drive dedicated DC-DC converter and a gate drive circuit. It corresponds to various power modules by adding external gate resistor of your choice.
Applications
Data sheet
2dm150806cm
2dm180206cm
2dm180506cm
Specifications
Model | SiC Driver | IGBT Driver | |||
2DM180506CM | 2DM180206CM | 2DM150806CM | 2DM150606CM | ||
Input | Supply voltage range | DC13V to DC28V / DC24V | |||
Input signal voltage | 5V | ||||
Output | Number of drive circuits | 2 | |||
Maximum output power | 3W (per circuit) | ||||
Output terminal voltage (H) | +17V~+19V | +17V~+19V | +14V~+16V | +14V~+16V | |
Output terminal voltage (L) | -4V~-6V | -1V~-3V | -7V~-9V | -5V~-7V | |
Switching frequency | 200kHz max | ||||
Gate drive capability | 2400nC/50kHz 600nC/200kHz |
2800nC/50kHz 700nC/200kHz |
2400nC/50kHz 600nC/200kHz |
2600nC/50kHz 650nC/200kHz |
|
(When the output power per circuit is equivalent to 3W) | |||||
Maximum output current | 18A peak (guaranteed by design) | ||||
Delay time | 100nsec. (typ.) | ||||
Mirror clamp detection | Operation with Output terminal voltage +2Vtyp.; -3A peak (guaranteed by design) |
||||
Desaturation protection function | Fault signal output function; Recovery by turning on the reset input again. |
||||
Signal transmission method (isolation circuit) | Magnetic | ||||
Dielectric withstand voltage | AC2500V / 1min. Note: Between primary and secondary; Between drive circuits |
||||
Operating temperature range | -30℃ to +85℃; Maximum output power at 85℃: Approximately 1W (per circuit) Note: Temperature derating may occur depending on the drive conditions. |
||||
Operating humidity range | 20% to 95% RH (No condensing) |
Product Documents
To contact for products and services ( inquiry form ) ,click here!